USAfixTM - Repair Guide (RG) - Master

Email RG

- Check for power to the solenoid valve

Level of Difficulty - HIGH	Estimated Completion Time - 15 minutes
TASKI - FG 2C
	Tools Required Tool   Screwdriver-phillips Volt meter (True RMS capable)
	Parts Required

Step   Procedure & Parts & Tools 1 LAY THE MACHINE DOWN SO THE FRONT COVER IS FACING UP. REST THE MACHINE ON BOARDS SO THAT THE FILTER ON THE BACK DOESNT GET BROKEN. 2 REMOVE THE 4 SCREWS AND LIFT UP ON THE FRONT COVER TO REMOVE IT. Screwdriver-phillips 3 LOCATE THE 2 WIRES ON THE SOLENOID VALVE. DISCONNECT THE WIRE CONNECTORS. INSERT THE VOLT METER LEADS INTO THE WIRE CONNECTORS. (EITHER LEAD CAN GO IN EITHER CONNECTOR). TURN THE MACHINE ON. THE VOLT METER SHOULD READ APPROXIMATELY 24 VOLTS. Volt meter (True RMS capable) 4 IF SOLENOID VALVE IS OKAY, REVERSE STEPS 1 THRU 3 TO REASSEMBLE MACHINE.